Ginger Shouwu Shampoo Soap
I 'd like to share with you the process of making handmade soap. Handmade soap is also called "cold soap" (Baidu can check the detailed instructions). There is no mysterious formula. Making soap with heart, using good materials, pure natural without additives, rich foam and no irritation to skin completely replace facial cleanser and shower gel. It is healthy, environmentally friendly and beautiful (after several years of continuous adjustment of formula dosage, I feel this is the best)
Food Ingredients
Camellia Oil 225g (30%)
Castor oil 135g (18%)
Olive oil 105g (14%)
Palm oil 135g (18%)
Coconut Oil 150g (20%)
200 grams of fresh ginger juice (including 100 grams for freezing), 110 grams of sodium, 120 grams of water, several grams of ginger powder and shouwu
Step
1
Raw materials for making soap (olive oil, palm oil, coconut oil, camellia oil, castor oil, ginger juice, sodium hydroxide, water)
2
Tools to prepare:
1, measuring cup 3 stainless steel basin 1, electronic scale 1,
2. One stirring rod, two thermometers, one egg beater and one rubber scraper,
3. Several soap molds, 1 pair of rubber gloves and 1 mask
One
1, measuring cup 3 stainless steel basin 1, electronic scale 1,
2. One stirring rod, two thermometers, one egg beater and one rubber scraper,
3. Several soap molds, 1 pair of rubber gloves and 1 mask
One
3
Use a juicer to squeeze out the required ginger juice and freeze it in the refrigerator for later use.
4
Frozen good ginger juice
5
Mix frozen ginger juice with a little water
6
measure the required grease
7
measure out the required sodium hydroxide
8
Then slowly pour the sodium hydroxide into the ginger juice in 4 times
9
Then use a stirring rod to quickly stir until the alkaline water is transparent
At this time, the temperature of alkaline water began to rise rapidly to 70 to 80 degrees.
At this time, the temperature of alkaline water began to rise rapidly to 70 to 80 degrees.
10
measure the required grease
11
Pour the required grease into a stainless steel basin and heat it to about 45 degrees in water.
12
When the temperature of the alkaline water and grease drops to 42 to 48 degrees (note: the temperature of the alkaline water and grease must be the same to mix and stir)
13
Then slowly pour the alkaline water into the stainless steel basin filled with grease, and stir it with an egg beater while pouring it.
14
The first 10 minutes must be continuously stirred (to avoid oil-water separation), after stirring for 10 minutes, you can stop 2 to 3 minutes and then stir, light T (refers to slightly viscous) and then pour 100 grams of ginger juice, continue to stir until viscous
15
When the stirring is viscous, you can clearly draw 8 characters in the soap and stop stirring.
16
At this time, additives (shouwu powder, ginger powder, etc.) can be added and quickly stirred evenly into the mold.
17
of shouwu powder
18
of ginger powder
19
of ginger juice
20
After entering the mold, cover it with a towel or use a foam box for fruit insulation to make it better and completely saponified
21
Remove the membrane after one to two days.
22
Ginger soap demoulding
23
Shouwu soap demoulding
24
After demoulding, put a ventilated place to air the soap naturally, and test the pH value with ph test paper for about 1 month, and it can be used.
25
Use a knife to cut into the pieces you need (the knife is not good, cut into different sizes)
26
Pack it up and go up immediately.
